8812 Series: Lightweight Static Control
The Lightweight 8812 Series Garment is the industry standard for operators requiring consistent static control without the weight of traditional lab coats. Designed as a primary shield, these garments prevent the discharge of static electricity from the user’s clothing to sensitive electronic components, ensuring a safe and compliant workspace.
Product Features
-
Full Compliance: Meets the strict static shielding requirements of ANSI / ESD Association S20.20 for “Static Control Garments.”
-
Operator Comfort: Constructed from breathable, lightweight fabric to reduce heat stress during extended shifts.
-
Versatile Styles: Available in two lengths—Jacket (waist-length) for mobility or Lab Coat (3/4 length) for maximum coverage.
-
Grounding Options: Features customizable cuffs (Snap or Knit) and necklines (V-neck or Collar) to integrate seamlessly into your facility’s grounding protocols.
-
Custom Configurations: Ability to add or remove pockets based on specific operational needs (MOQ applies).
Industry Applications
The 8812 Series is specifically designed for environments where electrostatic discharge (ESD) can cause catastrophic failure or latent defects in sensitive technology. Primary applications include:
-
Electronic Assembly: Ideal for PCB assembly, soldering stations, and hardware integration.
-
Semiconductor Manufacturing: Protecting wafers and microchips from human-generated static.
-
Aerospace & Defense: Safe handling of sensitive avionics and communication equipment.
-
Medical Device Production: Maintaining a static-safe environment for delicate diagnostic tools.
-
Testing & R&D Labs: Providing reliable protection for engineers and technicians during prototyping.
Table Specifications: 8812 Series
The 8812 Series is defined by its precision-engineered fabric and industry-leading static dissipation rates. Below is a breakdown of the technical standards that make this garment a staple in controlled environments.
| Dimension | Specification | Test Method |
| Composition | 88% Polyester 12% Carbon | ASTM D-629 |
| Ounces Per Square Yard | 2.2 | ASTM D-3776-85 |
| Surface Resistivity | 6.98 x 105 Ohms Square | GTM Initial |
| Charge Decay | 0.5 seconds per 1000 volts | GTM |
| Finished Width | 60 | ASTM D-3774-89 |
| Wales per Inch | 36 | ASTM D-3887-80 |
| Courses per Inch | 55 | |
| Wash Shrinkage Length | 3 | AATCC-135-1987 |
| Wash Shrinkage Width | 3 | (1 (160˚) x 10) (Aiix10) |
| Grab Tensile Length | 72 | ASTM D-5034 |
| Grab Tensile Width | 50 | ASTM D-5034 |
| Trap Tensile Length | 16 | ASTM D-5735 |
| Trap Tensile Width | 7.5 | ASTM D-5735 |
| Elongation @ Break Length | 57 | ASTM D-5034 |
| Elongation @ Break Width | 127 | ASTM D-5034 |
| Stretch Length | 7 | ASTM D-4964 (5 lbs) |
| Stretch Width | 50 | ASTM D-4964 (5 lbs) |
| Flammability | Pass | 16 CFR 1610 |
| Colorfastness | Depending on Shade | AATCC |
Advanced Material Composition
At the core of the 8812 Series is a high-performance blend of 88% Polyester and 12% Carbon-suffused nylon. While many standard ESD garments use a lower carbon percentage, our 12% carbon grid ensures superior conductivity and a more reliable path to ground. This grid is woven directly into the fabric, ensuring the ESD protection never “washes out.”
Superior Static Dissipation
-
Surface Resistivity: Engineered to maintain a consistent surface resistivity of 6.98 × 105 Ohms/Square, placing it firmly within the dissipative range required for sensitive electronic assembly.
-
Rapid Charge Decay: In the event of a static charge, the garment achieves a decay rate of 0.5 seconds per 1,000 volts, safely neutralizing potential threats before they can damage hardware.
Ultra-Lightweight Ergonomics
Weighing in at just 2.2 ounces per square yard, the 8812 Series is one of the lightest ESD garments on the market. This “barely-there” feel significantly reduces operator fatigue and heat stress, particularly in facilities with high ambient temperatures or strict climate controls.
Industrial Durability & Safety
-
Tensile Strength: Despite its light weight, the fabric boasts a high grab tensile strength (72 lbs Length / 50 lbs Width), ensuring it withstands the rigors of daily industrial use.
-
Dimensional Stability: Designed with a low wash-shrinkage rate of only 3%, ensuring the garment maintains its professional fit and coverage over a long service life.
-
Safety Standards: The fabric is 16 CFR 1610 compliant for flammability, providing an added layer of safety for the wearer.
Regulatory Compliance
Every garment is manufactured and tested in strict accordance with:
Laundering & Maintenance Instructions
To maintain the electrical integrity and prolong the life of your 8812 Series ESD Jacket, proper laundering is critical. Standard industrial cleaning or harsh chemicals can break down the carbon-suffused fibers, compromising the garment’s ability to dissipate static.
Best Practices for ESD Longevity
-
Detergent: Use only non-ionic, liquid detergents. Avoid powders or detergents with added “brighteners” or softeners.
-
Temperature: Machine wash in Cold or Warm water (100°F / 38°C maximum).
-
Drying: Tumble dry on Low heat or hang dry. High heat can cause the synthetic fibers to shrink or become brittle.
-
Bleach & Softeners: NEVER use bleach, starch, or fabric softeners. These coatings will insulate the conductive fibers and render the ESD protection useless.
Expected Service Life
Most ANSI/ESD S20.20 certified smocks are rated for approximately 80 to 100 washes when following these guidelines.
Warning: Using a standard “industrial washing service” that utilizes high-heat drying or harsh chemicals may degrade the garment’s effectiveness in as little as one cycle.
Testing Recommendation
We recommend testing your garments periodically using a surface resistance meter to ensure they still meet your facility’s ESD safety requirements.
ANSI / ESD S20.20 Compliance
A certified “Static Control Garment” is a critical component of any ESD Protected Area (EPA). The 8812 Series is designed to meet the rigorous standards set by the ESD Association to prevent costly damage to sensitive electronic components.
Understanding the Standard
According to ANSI/ESD S20.20, a compliant garment must maintain a surface resistance of less than 1 x 1011 Ohms when measured point-to-point.
Why the 8812 Series Complies:
-
Faraday Cage Effect: The integrated conductive grid (6mm x 5mm) acts as a shield, containing static charges generated by the wearer’s inner clothing and preventing them from reaching sensitive devices.
-
Point-to-Point Resistance: Rigorously tested to stay well within the 1 x 1011 Ohm limit, typically measuring in the 106 to 108 range.
-
Reliable Grounding: When used with the integrated hip stud and cuff snaps, the jacket can serve as a primary grounding path for the wearer, meeting the requirements for Garment System testing.
Testing & Verification
We recommend using the ESD TR53 “Garments Section” test method for your periodic compliance audits. Regular testing ensures that laundering or wear-and-tear has not compromised the conductive path of the garment.
Compliance Note: To maintain your facility’s S20.20 certification, ensure all personnel are trained on the proper laundering of these jackets to prevent insulative build-up from standard detergents.
Custom ESD Apparel Solutions
While we offer the 8812 Series in standard configurations, we provide extensive customization options for large-scale deployments and specific branding requirements.
Available Customizations:
- Custom Embroidery: Add company logos, department names, or individual employee names for a professional, unified look.
- Sizing Options: Standard sizes range from Small to 5XL. Custom sizing is available upon request for specialized fit requirements.
- Bulk Configurations: Choose between V-Neck or Collar styles and specialized cuff types (Snap or Knit) for your entire team.
- Color Matching: For large volume orders, we can discuss alternative color options to match your corporate branding.
How to Request a Custom Quote:
To help us provide an accurate estimate, please include the following in your request:
- Style & Quantity: Specify the preferred collar/cuff style and the total number of units.
- Size Breakdown: A rough estimate of the quantity per size (S-5XL).
- Branding Needs: Note if you require embroidery and provide a high-resolution logo file if available.
Note: Custom orders (including embroidery) typically involve a Minimum Order Quantity (MOQ) and extended lead times. Contact sales@4bennett.com for a detailed project timeline.
Reviews
There are no reviews yet.